Wednesday, May 18, 2016
7 Ultimate Fully Activated uine x86 x64
7 Ultimate
Fully Activated uine x86 x64
Tm ! M-J-R !
Platform: 32/64-bit
Language: English and MULTILANGUAGE SUPPORT
Type: ISO Bootable
: No and no needed
Size: 3.47GB
Version: uine version - FULLY UPDATABLE with Update.
Relse Notes:-
* Internet access (fees may apply)
* Depending on resolution, playback may require additional memory and
advanced graphics hardware
* For some Media Center functionality a tuner and additional hardware may be required
* Touch and Tablet PCs require specific hardware
* HomeGroup requires a network and PCs running 7
* / authoring requires a compatible optical drive
* BitLocker requires Trusted Platform Module (TPM) 1.2
* BitLocker To Go requires a USB flash drive
* XP Mode requires an additional 1 GB of RAM, an additional 15 GB of available hard space, and a processor capable of hardware virtualization with VT or AMD-V turned on
* Music and sound require audio output
How to change language?
*Look at this official site from , it's a tutorial.*
http://support..com/kb/972813
7 System Requirements:-
If you want to run 7 on your PC, here's what it takes:
* 1 gigahertz (GHz) or faster 32-bit (x86) or 64-bit (x64) processor
* 1 gigabyte (GB) RAM (32-bit) or 2 GB RAM (64-bit)
* 16 GB available hard space (32-bit) or 20 GB (64-bit)
* DirectX 9 graphics device with WDDM 1.0 or higher driver
INSTRUCTIONS:-
- Download and extract using WinRAR.
- Use Nero or other ing app to the ISO
- ing speed should not be faster than 4x. Otherwise, it might not work.
- Restart your computer.
- Make sure you have selected your -ROM/RW drive as a first boot device.
* Enter the BIOS pressing the DEL button, set the option, insert your 7
installation and restart computer.
- The black screen will appr ( 01).
- Press any to boot from or .... (by pressing the you are entering the setup)
- Select your language, time and currency and board input (optionaly)
- Click install now
- Choose your edition (x86 is 32-bit, x64 is 64-bit) depending of CPU type you have.
*Choose x64 if you have 64-bit processor.
- Click "I accept".
- Click "Custom" (advanced).
- Choose your partition/hdd drive where Win7 should be installed and click format.
*You might get some error if you have two or more hard s with different
connectors (ATA and SATA).
If you get an error, turn off one of your hard s and rept the whole
proces.
- After formatting, setup will continue automaticly and it will finish after 15 -30 min.
- Next step would be username
- Type your (if you want).
- When you get the screen for - just ignore it lving blank.
*Uncheck the box for automaticly and click next.
- Choose the third option for next step.
- Select your time zone.
- Select your current loion (Home is recommended).
- The black CMD will appr. Wait a few seconds until computers restares once again.
- And that would be all about installation. You are in now.
:-
It is not required, because it is OEM. will be premanently activated.
However, it is well known that there is some problems with and machines.
So if you have issues with pre- you will be forced to some
to activate 7.
Use the loader named: (.7.Loader.eXtreme.Edition.v3.503-NAPALUM.zip) if you have problems and let the loader automatically activate your system and restart and u will have activated
Download 7 Ultimate Fully Activated uine x86 x64
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment